Guide: Steam generator maintenance The steam generator burns stably; it can obtain a higher working temperature at a lower working pressure; the heating temperature is stable, the adjustment is accurate, and the thermal efficiency is high; the steam generator operation control and safety detection devices are complete. Installation and commissioning of the steam generator Check whether the water supply and gas pipelines are tight.

Steam generators, also called steam heat source machines (commonly known as boilers), are mechanical equipment that uses the heat energy of fuel or other energy sources to heat water into hot water or steam. The original meaning of pot refers to the water container heated on the fire. The furnace refers to the place where fuel is burned. The boiler includes the pot and the furnace.

　　Maintenance of the steam generator The steam generator burns stably; it can obtain a higher working temperature under a lower working pressure; the heating temperature is stable, the adjustment is accurate, and the thermal efficiency is high; the steam generator operation control and safety detection devices are complete. Installation and commissioning of the steam generator Check whether the water supply and gas pipelines are tight.

　　 Check whether the wires, especially the connecting wires on the heating tube, are connected and in good contact. Check whether the water pump is working properly. When heating for the first time, observe the sensitivity of the pressure controller (within the control range) and the accuracy of the pressure gauge reading (whether the pointer is zero). Must be grounded. Maintenance of the steam generator Check whether the inlet valve is open during each trial period. Dry burning is strictly prohibited!

　　Drain the sewage after each use (days) (must maintain a pressure of 1-2kg/c㎡, and open the drain valve to completely discharge the dirt in the boiler). It is recommended to open all valves and turn off the power after each discharge. Add detergent and neutralizer every month (add according to instructions). Check the wiring regularly and replace the aging wiring and electrical appliances.

　　 Turn on the heating pipe regularly to thoroughly clean the scale in the generator furnace. The annual inspection of the steam generator (to the local boiler inspection station), the safety valve, and the pressure gauge must be calibrated. The precautions for the use of the steam generator must be discharged in time, otherwise it will affect the gas production effect and service life. It is strictly forbidden to fasten parts under steam pressure to avoid damage.