Guide: The structure of biomass water heater: each independent hot water component is equipped with thermocouple and solenoid valve water and gas linkage combination valve, circulating small water pump heat exchange tube, temperature control device, low pressure protection device.

　　The structure of biomass water heater: each independent hot water component is equipped with thermocouple and solenoid valve water and gas linkage combination valve, circulating small water pump heat exchange tube, temperature control device, low pressure protection device.

　　The principle of biomass water heaters: the start-up of each stage of hot water components is subject to multiple thermostats in the water collection pipe. When the water passes through the water collection pipe and the water temperature measured by the thermostat does not reach the preset water temperature, the electronic device connected to the thermostat is connected. The control element will drive the small water pump of the water heater to absorb water into the heat exchange tube in the combustion chamber. At the same time, the push rod in the water assembly pushes open the gas regulating valve due to the pressure difference generated by the start of the water pump, allowing the liquefied gas to enter the combustion chamber for combustion. Heat the water.