Guide: Circulating fluidized bed combustion technology is a clean, low-temperature coal-burning technology developed and promoted in recent years. Our company is summing up and learning from domestic circulating fluidized bed boilers.

　　Circulating fluidized bed combustion technology is a clean, low-temperature coal-burning technology that has been developed and promoted in recent years. On the basis of summarizing and learning from the mature technology of domestic circulating fluidized bed boilers, our company has carried out targeted technological upgrades and product replacements. Significant improvement and improvement in performance, energy saving and environmental protection performance, operational reliability, and maintenance。SHX series fluidized bed boiler Using the circulating suspension combustion technology, it has the characteristics of high thermal efficiency, high desulfurization rate, low NOx emission, simple structure and convenient operation. It has a wide range of application prospects and is an ideal product to replace traditional boilers.

　　Circulating fluidized bed boiler using fluidized combustion, the main structure includes the combustion chamber (including the dense phase zone and the dilute phase zone) and the recycling furnace (including the high-temperature gas-solid separator and the return system).

Rated evaporation capacity: 4 t/h

Rated pressure: 1.25 MPa

Rated steam temperature: 194 ℃

Applicable fuel: coal, biomass

1. Wide range of combustible fuels

　　The temperature in the furnace can be evenly maintained in a stable range (850℃～950℃). The fuel particles added to the furnace are quickly heated to the temperature of the furnace and ignite. Therefore, the circulating fluidized bed boiler can burn various solid fuels without auxiliary fuel.

2. High combustion efficiency

　　After the fuel enters the furnace of the boiler, it quickly mixes with a large amount of hot bed material, and immediately ignites and burns with a high burning rate. In addition, the unburned particles separated by the cyclone separator are sent back to the furnace for cyclic combustion, which prolongs the fuel burning time and facilitates the burning of the fuel.

3. Good desulfurization effect

　　The desulfurization agent in the circulating fluidized bed boiler is desulfurized at the corresponding reaction temperature in the furnace. The internal circulation and external circulation of fuel and materials in the furnace make the average residence time of the desulfurizer in the boiler longer, and the desulfurization process full. In addition, the particle size of the desulfurizing agent added to the boiler is small (0.1mm), and the reaction contact area with the material is large, so that the desulfurization efficiency is higher.

4. Low NOx emissions

　　The furnace temperature of the circulating fluidized bed boiler is between 850°C and 950°C, the temperature is lower, and the generated NOx is less. In addition, the circulating fluidized bed adopts staged air supply and staged combustion, which can effectively reduce the generation of NOx.

5. High heat load on furnace section

　　Strong mixing in the furnace, fast heat transfer, high heat load in furnace section, generally 3～5MW/㎡

6. Ash and slag can be used in a variety of ways

　　Because the circulating fluidized bed boiler has low temperature combustion and high combustion efficiency, the ash discharged from the boiler has not been melted and has a small carbon content, and the ash contains a large amount of calcium oxide and calcium sulfate, which can be used for cement admixtures and construction Comprehensive utilization of materials and brick and tile production.